Planet VDR-301n User Manual page 68

5.4.2.2 Virtual Server
Internet users would not be able to access a server on your LAN because of native NAT protection.The "virtual
server" feature solves these problems and allows internet users to connect to your servers.
The following table describes the parameters:
Field
Service Type
Protocol
WAN Setting
WAN Interface
WAN Port
LAN Open Port
Figure 5-46 Virtual Server
Description
You can select the common service type, for example, AUTH, DNS or
FTP. You can also define a service name.
 If you select Usual Service Name, the corresponding parameter
has the default settings.
 If you select User-defined Service Name, you need to enter the
corresponding parameters.
Choose the transport layer protocol that the service type uses. You can
choose TCP, UDP or TCP+UDP.
You can choose Interface or IP Address.
Choose the WAN interface that will apply virtual server.
Choose the access port on the WAN.
Enter the port number of the specified service type.
68
User Manual of VDR-301N