Others - Planet VDR-301n User Manual

The following table describes the parameters:
Field
Enabled/Disabled
Interface groups

5.4.6 Others

Choose Advance > Others and the page shown in the following figure appears. The page displayed contains
Bridge Setting, Client Limit, Tunnel, Telnet and Others.
5.4.6.1 Bridge Setting
Choose Advance > Others > Bridge Setting and the page shown in the following figure appears. This page is
used to configure the bridge parameters. You can change the settings or view some information on the bridge
and its attached ports.
The following table describes the parameters:
Field
Aging Time
802.1d Spanning Tree
Show MACs
Description
Click the radio button to enable/disable the interface group feature. If
disabled, all interfaces belong to the default group.
To manipulate a mapping group:
1. Select a group from the table.
2. Select interfaces from the available/grouped interface list and add it
to the grouped/available interface list using the arrow buttons to
manipulate the required mapping of the ports.
Figure 5-57 Bridge Setting
Description
If the host is idle for 300 seconds (default value), its entry is deleted
from the bridge table.
You can select Disable or Enable.
Select Enable to provide path redundancy while preventing undesirable
loops in your network.
Click it to show a list of the learned MAC addresses for the bridge.
77
User Manual of VDR-301N