Planet VDR-301n User Manual page 94

The following table describes the parameters:
Field
Direction Select
LAN ACL Switch
IP Address
Services Allowed
Add
If WAN is selected in the field of Direction Select, the page is shown in the following figure.
Description
Select the router interface. You can select LAN or WAN. In this
example, LAN is selected.
Select it to enable or disable ACL function.
Enter the IP address of the specified interface. Only the IP address that
is in the same network segment with the IP address of the specified
interface can access the router.
You can choose the following services from LAN: Web, Telnet, SSH,
FTP, TFTP or PING. You can also choose all the services.
After setting the parameters, click it to add an entry to the Current ACL
Table.
Figure 5-75 ACL WAN
94
User Manual of VDR-301N