Planet VDR-301n User Manual page 59

5.3.6.4 Access Control List
This page allows administrator to have access control by entering MAC address of client stations. When this
function is enabled, MAC address can be added to access control list and only those clients whose wireless MAC
address are in the access control list will be able to connect to your VDR-301N.
The following table describes the parameters:
Field
Wireless Access Control
Mode
MAC Address
Apply Changes
Add
Reset
Delete Selected
Delete All
Figure 5-37 Wireless Access Control
Description
The Selections are:
Disable: Disable the wireless ACL feature.
Allow Listed: When this option is selected, no wireless clients except
those whose MAC addresses are in the current access control list will
be able to connect (to this device).
Deny Listed: When this option is selected, all wireless clients except
those whose MAC addresses are in the current access control list will
not be able to connect (to this device).
Enter client MAC address.
Click Apply Changes to add new settings; then it restarts.
Click to add MAC address to the Current Access Control List.
Clear the settings.
Select the rows to be deleted from Current Access Control List.
Flush the list.
59
User Manual of VDR-301N