Planet VDR-301n User Manual page 79

5.4.6.3 Tunnel
Choose Advanced > Others > Tunnel and the page shown in the following figure appears. This page is used to
configure the IPv6 with LAN to transfer to IPv4.
The following table describes the parameters:
V6inV4 Tunnel
Field
Enable
Interface
Mode
DS-Lite Tunnel
Field
Enable
Interface
Mode
Figure 5-60 Tunnel
Description
Enable or Disable the V6inV4 Tunnel.
Select the current WAN interface used as tunnel interface.
6to4 Tunnel or 6rd Tunnel.
Description
Enable or disable the DS-Lite tunnel.
Select the current WAN interface used as tunnel interface.
Auto or Manual.
79
User Manual of VDR-301N