Planet VDR-301n User Manual page 49

Interface
IP Pool Range
Show Client
Subnet Mask
Default Gateway
Max. Lease Time
Domain Name
DNS Servers
Click Show Client on the DHCP Mode page and the page shown in the following figure appears. You can view
the IP address assigned to each DHCP client.
The following table describes the parameters:
Field
IP Address
MAC Address
Expiry(s)
Refresh
Close
By default, all ports are selected; click it to unselect and those ports cannot
function with the IP address.
Specify the lowest and highest addresses in the pool. It specifies the first IP
address in the IP address pool. The router assigns IP address based on the
IP pool range to the host.
Click it and the Active DHCP Client Table appears. It shows IP addresses
assigned to clients.
Enter the subnet mask.
Enter the default gateway of the IP address pool.
The Lease Time is the amount of time that a network user is allowed to
maintain a network connection to the device using the current dynamic IP
address. At the end of the Lease Time, the lease is either renewed or a new
IP is issued by the DHCP server. The amount of time is in units of seconds.
The default value is 1440 minutes (1 day).
Domain Name is the most recognized system for assigning addresses to
Internet web servers.
You can configure the DNS server IP addresses for DNS Relay.
Figure 5-27 DHCP Table
Description
It displays the IP address assigned to the DHCP client from the router.
It displays the MAC address of the DHCP client. Each Ethernet device has
a unique MAC address. The MAC address is assigned at the factory and it
consists of six pairs
A8-F7-E0-00-11-22.
It displays the lease time. The lease time determines the period that the
host retains the assigned IP addresses before the IP addresses change.
Click it to refresh this page.
Click it to close this page.
of hexadecimal character,
49
User Manual of VDR-301N
for example,