Skew Check - Lexmark T652 Service Manual

Action
Step 6
Check the printhead installation, and reinstall and adjust the
printhead assembly if necessary. Go to
removal" on page 334
assembly removal" on page
Does the problem remain?
Step 7
Perform a print test.
Does the problem remain?

Skew check

Action
Step 1
Check the printer installation placement for installation surface
irregularities. Check the printer caster for any damage. If
necessary, correct the installation placement.
Does the problem remain?
Step 2
Properly load media into the media tray assembly and set all guides
correctly. Properly reinstall the media tray assembly into the printer.
Does the problem remain?
Step 3
Check the area of the media feed units for obstructions, and
remove them if necessary.
Does the problem remain?
Step 4
Check the transfer roll assembly for contamination and wear, and
replace the transfer roll assembly if necessary. Go to
assembly removal" on page
Does the problem remain?
"T650 printhead assembly
or "T652, T654, and T656 printhead
336. .
314.
Diagnostic information
Yes
Go to step 7.
Contact next level of
support.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
"Transfer roll
52
4062
No
Problem is solved.
Problem is solved.
No
Problem is solved.
Problem is solved.
Problem is solved.
Problem is solved.