Installing Ops Expansion (Optional) - Planar UR7551-MX User Manual

Installing OPS Expansion (Optional)

Installing OPS Expansion (Optional)
Planar UltraRes Series displays are equipped with an expansion slot that supports the
Intel
PC's, SDI modules, HDBaseT receivers, etc.
To install an OPS device, remove the protective cover on the display and slide the
device firmly into position. When installed, the OPS device will be connected
internally to the display. No external video or power cables are required.
For convenience, two Type-A USB 2.0 ports and one Type-A USB 3.0 port are provided
on the side I/O panel below the OPS slot. When an OPS device is installed, these USB
ports can be used for a keyboard, webcam, USB drive, or other peripherals.
24
®
Open Pluggable Specification (OPS). The slot will support OPS devices such as
Planar UltraRes Series User Manual