Planar UR7551-MX User Manual page 47

Blue Gain
Red Offset
Green Offset
Blue Offset
Gamma
Content Rotation
Aspect Ratio
Overscan
Image Position
Revert to Defaults
Adjust the blue gain of the image
Range: 0~200; Default: 100
Adjust the red offset of the image
Range: 0~100; Default: 50
Adjust the green offset of the image
Range: 0~100; Default: 50
Adjust the blue offset of the image
Range: 0~100; Default: 50
Set the gamma of the image
Options: 1.5, 1.55, 1.6, 1.65, 1.7, 1.75, 1.8, 1.85, 1.9, 1.95, 2.0, 2.05, 2.1, 2.15, 2.2, 2.25, 2.3,
2.35, 2.4, 2.45, 2.5, 2.55, 2.6, 2.65, 2.7, 2.75, 2.8
Default: 2.2
Rotate the image on the display
Options: None, 90, 180, 270; Default: None
Set how the source is treated when the aspect ratio of the input is different than the
aspect ratio of the zone it is in. If the image does not fill the zone completely, the extra
margins are black.
Options: Auto, 16:9, 4:3, Fill Screen, Native, Letterbox; Default: Auto
Set the percentage of the image to remove from each edge
Range: 0~20; Default: 0
Move the image horizontally or vertically. The amount to move is measured in input
pixels.
Range: -1000~1000; Default: 0
Reset all settings in the Image Adjust menu to their factory defaults for the current zone
only
Planar UltraRes Series User Manual
Image Adjust Menu
41