Table of Contents
Advertisement
9.
Installing OPS Expansion (Optional)
Planar VM Series displays are equipped with an expansion slot that supports the Intel
Pluggable Specification (OPS). The slot supports OPS devices including PCs, SDI modules etc.
To install an OPS device, remove the protective cover on the display and slide the device firmly
into position. When installed, the OPS device connects internally to the display. No external
video or power cables are required.
Note: The Planar VM Series was tested with the Philips CRD50 OPS module.
Planar VM Series User Manual
020-1357-03A
Installing the Display
®
Open-
Page | 26
Advertisement
Table of Contents
