Planar UR7551-MX User Manual page 43

Zone 3
Zone 4
Auto Scan Sources
Advanced Layouts Submenu
This submenu defines the layouts for each multi-source view type.
Dual
Triple
Select the source displayed in Zone 3
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS; Default: HDMI 3
Note: If HDMI1 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI1 cannot be selected.
Select the source displayed in Zone 4
Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS; Default: HDMI 4
Note: If HDMI1 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI1 cannot be selected.
Select whether the display will automatically scan for a valid source on any zone that
currently does not have a source
Options: On, Off; Default: Off
Select from two dual source layout options. The layout in orange will be the active
layout displayed when the Multi-Source View is set to Dual.
Select from five triple source layout options. The layout in orange will be the active
layout displayed when the Multi-Source View is set to Triple.
Planar UltraRes Series User Manual
Inputs and Views Menu
37