External Control
In addition to using the Planar UltraRes remote control and display, there are other
methods of controlling the Planar UltraRes display externally:
• Using a serial link to send ASCII commands and to receive responses to those
commands. The same set of commands can be sent over RS-232, USB, TCP or
UDP. See the Planar UltraRes Series RS232 User Manual for more information.
• Using discrete infrared (IR) codes to program a third-party remote control. See
"IR Command Protocol" on page 30.
• Using the Planar UltraRes Remote Monitoring software to access the settings in
the OSD as well as some additional features via a web browser. See "Planar
UltraRes Remote Monitoring Software" on page 70.
Planar UltraRes Series User Manual
78