System Settings Submenu
Touch Control
Enable Status LED
Pixel Orbit
MEMC
DisplayPort Type
Set where the USB commands from the touch panel is routed:
•
OPS routes the touch USB commands to the OPS module
•
External routes the touch USB command to the USB-B connector
•
Auto routes the touch USB commands to the OPS module if the OPS source is
selected; otherwise, they are connected to the USB-B connector
When enabled, the status LEDs on the back of the display behave as indicated on
page 28. When disabled, the status LEDs are always turned off.
Options: Disable, Enable; Default: Enable
Create slight frame motion to help avoid image retention
Options: Enable, Disable; Default: Disable
Enable motion estimation motion compensation (frame interpolation). This improves
smoothness for fast motion video content.
Options: Off, Low, Medium, High; Default: Off
Set the version of DisplayPort that is used by the system
Options: 1.1, 1.2; Default: 1.2
Planar UltraRes Series User Manual
Advanced Settings Menu
63