Installing Ops Expansion (Optional) - Planar EP5804K User Manual

Installing OPS Expansion (Optional)

Installing OPS Expansion (Optional)
The Planar EP-Series displays are equipped with an expansion slot that supports the
®
Intel Open-Pluggable Specification (OPS). The slot will support OPS devices such as
PC's, SDI modules, HDBaseT receivers, etc.
To install an OPS device, remove the protective cover on the display and slide the
device firmly into position. When installed, the OPS device will be connected
internally to the display. No external video or power cables are required.
For convenience, two Type-B USB 2.0 ports and one Type-B USB 3.0 port are provided
on the rear cover of the display. When an OPS device is installed, these USB ports can
be used for a keyboard, webcam, USB drive, or other peripherals.
EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual 19