Suzuki GSF600Y 2000 Service Manual page 81

• The exhaust camshaft sprocket has an arrow marked "1" 1.
Turn the exhaust camshaft so that the arrow is aligned with the
gasket surface of the cylinder head.
• Engage the cam chain with the exhaust camshaft sprocket.
• The other arrow marked "2" should now be pointing straight up.
Starting from the roller pin A that is directly above the arrow
marked "2", count out 24 roller pins (from the exhaust camshaft
side going towards the intake camshaft side). Engage the 24th
roller pin B on the cam chain with the arrow marked "3" on the
intake sprocket. Refer to the following illustrations.
NOTE:
The cam chain should now be on all three sprockets. Be careful
not to move the crankshaft until the camshaft journal holders and
cam chain tensioner are secured.
24th pin
1st pin
ENGINE 3-43