Suzuki GSF600Y 2000 Service Manual page 79

• Install the new O-rings 1 onto the oil pipes and apply SUZUKI
SUPER GREASE "A" to the O-rings.
• Install the right and left oil pipes.
$
Replace the O-rings 1 with new ones to prevent oil leak-
age.
& 99000-25010: SUZUKI SUPER GREASE "A"
• Place the cylinder head onto the cylinder block.
• Cylinder head nuts and washers must be installed in the cor-
rect position as shown.
A Copper washer with cap nut (8 pcs)
B Steel washer with normal nut (4 pcs)
• Tighten the twelve 10-mm nuts in ascending order and to the
specified torque.
" Cylinder head nut: 38 N . m (3.8 kgf . m, 27.5 lb-ft)
• After firmly tightening the twelve 10-mm nuts, install the cylin-
der head bolt (6 mm) 2 and tighten it to the specified torque.
" Cylinder head bolt: 10 N . m (1.0 kgf . m, 7.0 lb-ft)
• Install the cam chain guide 3 as shown.
ENGINE 3-41
Exhaust side