Suzuki GSF600Y 2000 Service Manual page 77

• Make sure that the oil jets 1 in the upper crankcase are not
clogged.
• Install the pistons and piston pins in their original cylinders.
Refer to the scribe marks on each piston.
• Before installing the piston pins, apply molybdenum oil solu-
tion to their surfaces.
) 99000-25140: SUZUKI MOLY PASTE
• Place a cloth beneath the piston, and install the circlips 2.
NOTE:
* Install the pistons with the arrow mark A facing towards the
exhaust side.
* Be sure to use new circlips.
• Install the dowel pins and the new cylinder gasket.
• Before installing the cylinder block, oil the big and small ends
of each conrod and also the sliding surface of each piston.
NOTE:
Install the gasket with the "UP" mark facing up as shown.
$
Use a new gasket to prevent oil leakage.
ENGINE 3-39