Removal And Disassembly - Suzuki GSF600Y 2000 Service Manual

REMOVAL AND DISASSEMBLY

• Remove the engine sprocket cover. (!3-5)
• Disconnect the generator lead wire 1 and coupler 2.
NOTE:
Before disconnecting the generator lead wire, disconnect the
battery - lead wire.
• Remove the generator 3.
• Hold the generator driven gear using a vise 4 and two pieces
of wood 5 as shown. Then, remove the generator driven gear
nut.
"
Do not hold the damper housing 6 using the vise or the
damper housing will be damaged.
• Remove the damper housing 6 using the special tool.
# # # # 09913-61510: Bearing remover #
• Remove the generator end cover 7.
ELECTRICAL SYSTEM 6-11