Suzuki GSF600Y 2000 Service Manual page 73

• Install the primary driven gear assembly onto the countershaft,
and apply engine oil onto the needle bearing 1 and spacer 2.
• Install the thrust washer 3 onto the countershaft.
• Install the clutch sleeve hub onto the countershaft.
• Install the washer seat 4, washer 5 and clutch sleeve hub nut
6 as shown.
• Tighten the clutch sleeve hub nut to the specified torque.
( 09920-53740: Clutch sleeve hub holder
" Clutch sleeve hub nut: 95 N . m (9.5 kgf . m, 68.5 lb-ft)
• Insert the clutch drive plates and driven plates one by one into
the clutch sleeve hub in the prescribed order, drive plate first.
• Install the clutch push rods (6 and 7).
NOTE:
Apply SUZUKI SUPER GREASE "A" to the clutch push rod 7
when installing it.
& 99000-25010: SUZUKI SUPER GREASE "A"
ENGINE 3-35