Suzuki GSF600Y 2000 Service Manual page 72

3-34 ENGINE
• Install the gearshift shaft 1.
NOTE:
Align the center teeth on the gearshift shaft with the center teeth
on the gearshift cam driven gear.
• Install the washer and fix the gearshift shaft with the circlip.
( 09900-06107: Snap ring pliers
• Install the washer 2, pin 3, oil pump driven gear 4 and washer
5.
• Fix the oil pump driven gear with the circlip.
( 09900-06107: Snap ring pliers
• Install the thrust washer 6 onto the countershaft.
NOTE:
The flat surface of the thrust washer should face out.
• Install the generator/oil pump drive gears 7 onto the primary
driven gear assembly 8 as shown.