Suzuki GSF600Y 2000 Service Manual page 100

3-62 ENGINE
• Install the valve spring retainer, press down the springs using
the valve lifter and then install the cotter halves on to the stem
end. Then, release the valve lifter to allow the cotter 1 to wedge
between the retainer and the valve stem. Be sure that the
rounded lip A of the cotter fits snugly into the groove B in the
stem end.
" 09916-14510: Valve lifter
09916-14910: Valve lifter attachment
09916-84511: Tweezers
!
Be sure to install all of the parts in their original posi-
tions.
• Apply engine oil to the rocker arm shaft sufficiently.
• Install the rocker arms 2, the springs 3 and the rocker arm
shaft.
• Tighten the rocker arm shaft set bolt 4 and cylinder head plug
5 to the specified torque.
" 09900-00410: Hexagon wrench set
% Rocker arm shaft set bolt 4: 9 N . m (0.9 kgf . m, 6.5 lb-ft)
Cylinder head plug 5: 28 N . m (2.8 kgf . m, 20.0 lb-ft)
INTAKE PIPES
• When installing the intake pipe, apply SUZUKI SUPER
GREASE "A" to the O-ring.
) 99000-25010: SUZUKI SUPER GREASE "A"