Hardware Setting; Hardware Setting Screen - Sekonic SPEEDMASTER L-858D Operating Manual

7.

Hardware Setting

7-1

Hardware Setting Screen

The following settings can be made on the Hardware Setting Screen.
● User calibration of measured value
● Adjustment of touch panel display position
● Reset to factory settings (default settings)
● User information editing
Operation
1.
Ensure that the power is turned off, press
the Power Button
the Menu Button
The Hardware Setting Screen is displayed.
NOTICE
Do not release the Menu Button
the Hardware Screen is displayed.
2.
Touch the item on the Hardware Setting Screen.
Hardware Setting Screen
while holding down
5
of the meter.
9
until
9
No.
1
User
1
Calibration
2
3
4
Adjust Touch
2
Panel
Factory
3
Setting
Edit User
4
Information
188
Item Description
Allows you to preset a
compensation value for a
measured value and apply
it to the measurement
result. (Setting range:
-1.0 EV to 1.0 EV)
Touch the white cross
cursor displayed on the
screen, and adjust the
touch panel position.
Allows you to reset various
parameters and settings in
the meter to their factory
settings.
Allows you to edit user
information.
7. Hardware Setting
Power
Button
5
Menu
Button
9