Screen Transition - Sekonic SPEEDMASTER L-858D Operating Manual

3-3

Screen Transition

The basic screen transition is as follows.
A change in the Measuring Mode or settings can be made on the Measuring Screen.
Power ON
Startup Screen
Measuring Screen
Menu
Menu Button
9
Hardware Setting
Power Button
5
Menu Button
9
Measuring Mode
* The modes displayed can be selected in Custom Setting. ( P170)
Set the Measuring Mode that matches your intended
use.
● Ambient light
● Flash light
● HSS flash
● Flash duration analysis
Tool Box
Set, recall and clear meter/measuring functions to fit your needs.
● Set Average/Contrast Function
● Set Exposure Compensation ● Set Filter Compensation
● Set Mid. Tone
● Mid. Tone Recall
● Memory Clear
● Number of Pre-flash
● Flash Duration Analysis t Value ● Radio CH/Zone
Menu Function
Select, edit, and customize meter operations and
displayed measuring functions.
● Set Analog Scale
● Custom Setting
● Edit Exposure Profile
● Edit Frame Rate
● Edit Shutter Angle
● Edit Filter
View information about your meter.
● Product Information
● Regulation
Hardware Setting
While the meter's power is off, hold down the Menu
Button , then press the Power Button
9
the Hardware Setting Screen.
● User calibration of measured value
● Touch panel display position adjustment
● Reset to Factory settings (default settings)
● User information editing
14
3. Screen Operations
● Select Incident/Spot
● Mid. Tone Clear
● Set Exposure Profile
● Memory Recall
● Multi Clear
to display
5