Setting On The Tool Box Screen - Sekonic SPEEDMASTER L-858D Operating Manual

2)

Setting on the Tool Box Screen

1.
Touch the [Tool Box] Icon (
The Tool Box Screen is displayed.
2.
Touch the [Select Incident/Spot] Button on the Tool Box Screen.
The Select Incident/Spot Screen is displayed.
3.
Touch the [Incident Light] Radio Button.
This changes the system to the incident light system, and the display returns to
the Measuring Screen.
If you do not want to make any changes, touch the [Close] Button to return to the
Measuring Screen.
Measuring Screen
Select Incident/Spot Screen
NOTICE
Measurement values for the current Measuring Mode will be cleared when going to
the Select Incident/Spot Screen.
) on the Measuring Screen.
Tool Box Screen
Measuring Screen
Specified light receiving method
34
4. Basic Operations