Flash Duration Analysis Radio Triggering Mode - Sekonic SPEEDMASTER L-858D Operating Manual

5-4-3

Flash Duration Analysis Radio Triggering Mode

(Available when a transmitter sold separately is installed)
The meter detects flash brightness after Measuring Button
transmitted signal to radio receiver connected to flash. F-stop, flash duration time and
graph of flash waveform are displayed for input ISO sensitivity and shutter speed.
Depending on the radio system in use, the meter controls the output power of flash units
and the modeling lamps with turning ON/OFF.
For details, see the operating manual of the transmitter (sold separately).
[Measuring
Mode] Icon
NOTE
It may not be possible to adjust the light quantity of the modeling lamp depending on the
flash unit or EL-Skyport receiver used.
Measuring Screen
6
Measuring Mode Screen
107
5. Measuring
is pressed to send radio
( P196)

Measuring Screen