Functions Of Parts - Sekonic SPEEDMASTER L-858D Operating Manual

1-2

Functions of Parts

The following table lists the functions of each part.
No. Part Name
Lumisphere Retracting
1
Ring
Lumisphere
2
Objective Lens
3
Viewfinder Eyepiece
4
(with diopter adjustment)
Power Button
5
Measuring Button
6
Memory Button
7
Touch Panel LCD
8
Menu Button
9
USB Connector
0
USB Connector Cover
a
Synchro Terminal
b
Synchro Terminal Cover
c
Battery Cover
d
Battery Cover Latch
e
Strap Eyelet
f
Tripod Socket Hole
g
Transmitter (sold
h
separately) Compartment
Transmitter Connector Cover
i
Battery Compartment
j
Lumisphere Lock Lever
k
*1
The function of the Measuring Button
interchanged using Custom Setting. ( P41, P168)
*2
Be sure to reattach the Transmitter Connector Cover
Turn this to switch between the extended lumisphere and
retracted lumisphere. ( P35)
Position the meter at subject with Lumisphere facing toward
camera or light source during measurement. Can be freely
rotated through 270° to receive light. ( P32)
For viewing reflected-light spot measurements of subjects or scenes.
Attach the Step-up ring (sold separately) to mount a filter. ( P196)
Turn the viewfinder eyepiece to adjust the diopter scale.
( P40)
Press to turn ON/OFF. ( P5)
*1
Press for measurement.
Press after measuring to record the measured value.
*1
Press in Multi (Cumulative) Flash Mode to clear the number of
cumulative flashes.
Displays the setting screens and measurement screens.
The built-in touch panel function enables setting, selection or
operation by touching the displayed screens. ( P9)
Press to enter the Menu list from any of the screens.
Press again to return to the previous screen. ( P29)
The USB connector for connecting to the computer with the
installed Data Transfer Software.
(Terminal shape: Micro B type)
Protects USB terminal when not in use.
Accepts an optional synchro cord when using meter in Cord Flash Mode.
Protects synchro terminal when not in use.
Secures the batteries.
Pull out and rotate down to open battery cover.
Attach the accessory strap here. ( P3)
Used to attach the meter to a tripod. (1/4 inch, 20 threads)
Install radio transmitter (sold separately) for the radio triggering
of flash units. ( P90)
Protect the transmitter connector.
Hold 2x AA batteries. Insert as indicated in compartment. ( P4)
Use this lever to replace the lumisphere (when it is damaged or
contaminated).
6
1. Names and Functions of Parts
Function
*2
and that of the Memory Button
if the Transmitter is removed.
i
2
can be
7