Setting El-Skyport Mode - Sekonic LITEMASTER PRO L-478DR-A-EL Operating Manual

1-3. Setting EL-Skyport Mode

Set Normal mode or Speed mode on both the Skyport transmitter and receiver
according to shutter speed in use for desired effect.
1) Press the Menu button on the meter to open the Menu screen.
2) Touch [3. Custom Setting] and select [c-i) EL-Skyport Mode]
under [6.Flash Mode] in the displayed Menu screen.
3) Touch the radio button to select Normal or Speed mode.
Menu screen
4) Touch [OK] to complete the setting and return to the Custom Setting screen.
(Touch [Cancel] to return to the Custom Setting screen without change.)
5) Press the Menu button at the Custom Setting screen to return to the top of Menu
screen. Press the Menu button again to return to the Measuring screen.
6) In the Radio Flash mode, the Measuring screen shows the setting of Normal mode or
Speed mode.
EL-Skyport Normal Mode
EL-Skyport Speed Mode
•
Set both the meter and plug-in external or built-in EL-Skyport receivers to the same EL-Skyport mode (Normal or Speed).
Custom Setting screen
4
EL-Skyport Mode screen
Measuring screen
(Radio Triggering screen)
EL-Skyport
Mode
Menu button