Sekonic SPEEDMASTER L-858D Operating Manual page 86

4.
While looking through the viewfinder, press the Measuring Button
on the side of the meter to measure the light.
6
While looking through the viewfinder, locate the subject area to be measured within the
finder circle.
Press the Measuring Button
meter (measured value).
While the Measuring Button
the button is released.
When the Measuring Button
measured value at that time will be displayed in the measured value/measuring unit
display area and on the analog scale. ( P22, P24)
Measuring Screen
Measured Value (cd/m
WARNING
Do not look directly at the sun or an intense light source via the viewfinder.
Doing so may damage your eyesight.
NOTE
While looking through the viewfinder, adjust the
diopter by rotating the Viewfinder Eyepiece (with
diopter adjustment)
seen clearly.
, and the luminance will be displayed in Candelas square
6
is being pressed, the meter measures continuously until
6
is released, the measurement is completed. The
6
Viewfinder Display
2
)
so that the circle can be
4
72
Measuring Screen
Measured Value (fl)
Viewfinder Eyepiece
5. Measuring
Viewfinder Display
4