Sekonic SPEEDMASTER L-858D Operating Manual page 113

3.
Touch the [Number of Pre-flash] Button of the Tool Box.
The Number of Pre-flash Screen is displayed.
If you do not change this number, touch the [Close] Button.
Measuring Screen
4.
Touch the radio button of the Number of Pre-flash Button.
Set the number of pre-flash on the Number of Pre-flash Screen.
The display returns to the Measuring Screen.
If you do not change this number, touch the [Close] Button to return to the Measuring
Screen.
NOTE
The amount of pre-flashes fired by a flash unit can be different for different camera brands.
Check the camera manual for number fired by your camera system.
Tool Box Screen
Page 1
To next page
Number of Pre-flash Screen
99
5. Measuring
Tool Box Screen
Page 2
[Close] Button
[Close] Button