Sekonic SPEEDMASTER L-858D Operating Manual page 58

Ambient Light CINE Mode
Displays F-stop value for input frame rate, ISO sensitivity, and shutter angle
5
values. ( P60)
Ambient Light Illuminance lux Mode (Incident light measurement)
Displays brightness value in lux (lx) unit. ( P69)
Ambient Light Illuminance fc Mode (Incident light measurement)
Displays brightness value in foot-candle (fc) unit. ( P69)
6
Ambient Light Luminance cd/m
Displays brightness values in cd/m
Ambient Light Luminance fl Mode (Reflected light measurement)
Displays brightness value in foot-lambert (fl) unit. ( P71)
NOTE
Ambient Light refers to natural light (sunlight) as well as continuous light like tungsten
lamps and fluorescent lamps.
Measuring Mode: Flash Mode ( P172)
No. Icon
Cordless Flash Mode
Detects flash brightness without meter-flash connection after Measuring Button
7
pressed to arm meter for 90 seconds and flash fired separately, and displays
F-stop value for input shutter speed and ISO sensitivity. ( P74)
Cordless Multiple (Cumulative) (MLT) Flash Mode
Detects and accumulates flash brightness without meter-flash connection
after Measuring Button pressed to arm meter for 90 seconds and flash
8
fired separately, and displays F-stop value for input shutter speed and ISO
sensitivity. ( P79)
Cord Flash Mode
Detects flash brightness with synchro cord meter- flash connection, and
9
displays F-stop value for input shutter speed and ISO sensitivity. ( P85)
Cord Multi (Cumulative) Flash Mode
Detects and accumulate flash brightness with synchro cord meter- flash
0
connection, and displays F-stop value for input shutter speed and ISO
sensitivity. ( P87)
Radio Triggering Flash Mode
Detects flash brightness after Measuring Button is pressed to send radio
transmitted signal to radio receiver connected to flash. Displays F-stop value
a
for input shutter speed and ISO sensitivity (When a transmitter sold separately
is installed). ( P90)
2
Mode (Reflected light measurement)
2
unit. ( P71)
Description
44
4. Basic Operations