Table of Contents
Advertisement
,
•
Th e working distance of the radio triggering system can vary with the orientation and location of the meter and
receivers. Be sure to carefully set them within their specifications.
5-3-4. Measuring in Radio Flash Mode
Select Radio Triggering Mode within Custom Setting.
(See P55 for details.)
a. Touch the Measuring mode icon to open
the Measuring Mode Selection screen,
then touch the
Triggering Mode and return the screen
view to Measuring screen. (See P25 for
details.)
b. Set the ISO sensitivity value on the ISO
icon.
c. Set the shutter speed on the T (shutter
speed) icon.
* Be sure the settings are within the
specifications of the flash equipment.
d. To adjust flash intensity, touch the Power
Control icon
described in 5-3-3.
e. Be sure the Channels and Zones are the
same for meter and the radio receivers in
use.
f. Press the Measuring button
side of meter to radio trigger the flashes
and display the measured exposure value
(f-stop).
icon to select Radio
and make adjustments as
8
on the
Measuring Screen
(Radio triggering mode)
ControlTL
channel &
zone display
Measured value (f-stop)
41
Setting
value
Standard
®
channel &
zone display
Percentage
of flash
Advertisement
Table of Contents
