Siemens SIMATIC S5-90U System Manual page 579

S5-90U/S5-95U
C Dimension Drawings
Dimensions are indicated in millimeters. The approximate equivalent in inches is indicated in parentheses. (1 mm=0.039 in.
rounded off to the nearest tenth or hundredth of an inch)
2.5 (0.1)
Centerline
for oblong
hole
24 (1.0)
De-
burred
oblong
hole
Figure C-1. Cross Sections of Standard Mounting Rails
8.7 (0.3)
7 (0.3)
Figure C-2. Dimension Drawing of the 483-mm (19-in.) Standard Mounting Rail
EWA 4NEB 812 6115-02b
15°
Deburred
1
R 1.2 (0.05)
R 1.2 (0.05)
19 (0.8)
35 (1.4)
15 (0.6)
465.1 (18.3)
163.8 (6.5)
482.6 (19.0)
2.5 (0.1)
R 1.2 (0.05)
R 1.2 (0.05)
24 (1.0)
15 (0.6)
155 (6.1)
Dimension Drawings
15°
Deburred
1
19 (0.8)
35 (1.4)
11
(0.4)
C-1