Philips V24CT User's Reference Manual page 40

Parameter Modules
Parameter modules can be plugged into the following types of rack:
Rack Type
CMS Patient Monitoring System
Integral Rack
Satellite Rack
V24 and V26 Patient Monitor
8-slot Satellite
Rack
(Standard)
6-slot Satellite
Rack
(Optional)
Caution
When the rack is mounted in close proximity to any intravenous infusion
equipment, do not let saline solution get onto the rack or parameter
modules. Severe damage to the equipment can result if saline solution
leaks into the connectors at the rear of the modules.
You can plug the parameter modules into the rack and remove them as
you require them. The number of modules you can plug in depends on
the type of rack and the model of monitor you have ordered.
1-18 The CMS and V24 and V26 Patient Monitors
Mounting
This is fitted to the front of
the M1046A computer
module.
You can have one or more
satellite racks attached to
an I.V. pole, bedside or
wall.
Same as Satellite Rack for
CMS.
Same as Satellite Rack for
CMS.
This can also be mounted
to the back of the M1205A
V24CT and V26CT
Monitors
Comments
Cannot be used with
the M1167/77A CMS
Patient Monitoring
System. 8-slot rack.
Can be used with all
CMS Patient
Monitoring System.
Available as 6-slot or
8-slot rack.
Only one Satellite
Rack can be used
with a V24 and V26
Patient Monitor.