Controls of the
M1092A,
M1094A and
M1094B
Displays
System Power Connector
Human Interface Connector
Local Power Connector
Video Out Connector
Video In Connector
1. Video Termination Switch; thus switch is used to terminate the
video signal at this display: this must be switched to the "75 "
position if only a master display is used and must be switched to the
"HIGH IMP." position if a second, duplicate display is used.
M1094B Display Module
Maximum Voltages
Monitor Installation and Patient Safety 11-25
Controls and Connectors
60 V
12 V
240 V
5 V
5 V