Making Calibrated Ecg Recordings; If The Recorder Is Busy - Philips V24CT User's Reference Manual

Note—
on the recorder. If you change from a 4- to a 2-channel recorder, only the
first two waves are recorded.
Note—
recordings (selected in the Procedure Recordings Task Window). If the
power is off for more than 1 minute, a non-preset recording automatically
reverts to the default waves and recorder for Mode A. However, the speed
(25 mm/s), waves non-overlapped, and continuous runtime do not change.
Note—
produced when the alarm recording is finished. If a realtime recording is
in progress, and another parameter goes into alarm, an alarm message
appears on the realtime recording. When the realtime recording is
finished, the alarm recording is produced.
Making
If you want your ECG recording to be calibrated, you must select the size
Calibrated
of the ECG wave, depending on your recorder sector size. To select the
ECG
size, refer to the "Switching between EASI and Standard leads" on page
Recordings
14-22. The calibrated ECG wave recording will be 10mm/mV.
If the
Realtime: If a delayed recording, or any recording from another monitor,
Recorder is
is in progress at the central station at the time of your request, you are
Busy
alerted with a message on the monitor display, and the request is queued.
When the recorder is free, the recording runs. It consists of current
waveforms (not the waveforms from the time the recording was
requested).
If the recorder is busy with a realtime recording and you request another
realtime recording from the same monitor, the current recording stops
and the newly requested recording starts.
Delayed: If the recorder is busy at the time of your request, the waveform
data and the request are queued.
When the recorder is free, the recording runs. The recording shows the
waveforms from the time the recording was requested.
(CMS only): The number of recording channels available depends
Non-preset recordings are made on the same recorder as procedure
If a realtime recording is requested during an alarm recording, it is
Realtime Wave Recordings
Recording Functions 6-23