Procedure; Analog Output (Cms Only) - Philips V24CT User's Reference Manual

Procedure

The monitor returns to Main Screen. Test waves for each parameter being
monitored are generated for 30 seconds to test the processing abilities of
the monitor. The message "Test Signals active - no monitoring" appears
on the screen.
After 30 seconds, the monitor automatically switches back to Monitoring
Mode.
If you want to go back to Monitoring Mode before 30 seconds have
elapsed, press
Analog
The Analog Output function provides eight channels of Analog Output for
Output
connection to recorders and other data collection instruments. For more
(CMS only)
information on Analog Output, refer to Appendix B.
1. Press hardkey
Monitor Setup
Test Signals
2. Press softkey
Selection Window.
Monitor Setup
The Test Signals Function
i n the Instrument Configuration
, then Stop Signals
Setting up your Monitor 3-59
.