The Rear Panel Of The Display Modules - Philips V24CT User's Reference Manual

Warning Warning
Make sure all devices connected to the RS232 connectors are
isolated. Consult your biomedical engineer, who will verify this for
you.
10. PS ON/OFF connector (DSPC_FLAT); this is left open.
11. Video Out Connector (Flatscreen); this is a connector used to
The Rear
The system can have one of the following displays:
Panel of the
Display
Modules
The rear panel of each display module is shown below. The back of the
display module should only be removed by qualified service personnel
(or receive inputs from the Ohmeda 7800/7810 Ventilator or the
Anesthetic Gas Module).
8. HDLC Connector; this is used to connect to a STRIP recorder (such
as the Philips M1117A).
9. Video Out Connector (CDSPC-Video or DSPC); this is a connector
used to output information to be displayed on the display module.
output information to be displayed on the Flatscreen Display
Module and also to output 60V DC to the Flatscreen Display Module.
• the M1092A Monochrome display
• the M1094A Color display
• the M1094B Color display
• the M1095A Flatscreen Color display
Controls and Connectors
Monitor Installation and Patient Safety 11-23