Other Functions You Can Configure
You can also switch OFF parameters in the following ways:
If you switch off a parameter, you can ONLY enter the parameter's Setup
Task Window (via the module's hardkey) by first pressing
Module Setup
When you plug in a parameter module and connect the transducer or
adapter cable, the parameter is automatically switched on. (ECG, RESP
and NBP are automatically switched on when you plug in the relevant
module.)
3-34
Setting up your Monitor
4.
Press
Main Screen
•
Any parameter: unplug the module, and suspend or silence the
alarms.
•
Any parameter except ECG, RESP or NBP: disconnect the
transducer or adapter cable from the module, and suspend or
silence the alarms.
On/Off Setup
to return to the Main Screen.
.