Installation Information; Power Source Requirements; Grounding The System - Philips V24CT User's Reference Manual

Installation Information

Power
The CMS systems and the Anesthetic Gas Module can be operated from
Source
an AC source of 100 - 120V
Require-
50 - 60Hz.
ments
Typical input currents for the monochrome and color systems are:
Monochrome CRT
Color CRT
Color Flatscreen
Typical input current for the Anesthetic Gas Module is:
Typical input current for the V24 and V26 is:
Grounding
To protect the patient and hospital personnel, the cabinet of the installed
the System
equipment has to be grounded. The equipment is supplied with a
detachable 3-wire cable which grounds the instrument to the power line
ground (protective earth) when plugged into an appropriate 3-wire
receptacle. If a 3-wire receptacle is not available, consult the hospital
electrician.
Warning Warning
Do not use a 3-wire to 2-wire adapter.
±
100 - 240V = 1.0 amps
90 - 250V = 150VA
±
10%, or 220 - 240V 10%,
100 - 120V = 2.2 amps
200 - 240V = 1.2 amps
100 - 120V = 2.6 amps
200 - 240V = 1.4 amps
110 - 120V = 2.0 amps
200 - 240V = 1.0 amps
Monitor Installation and Patient Safety 11-5
Installation Information