Check The Parameter - Denon AVR-3806 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 2

Check the parameter

• The results of the measured items can be checked.
• The EQ parameters that were set in Auto Setup can be
checked.
• This item is displayed, after the measurement result of the
"Auto Setup / Room EQ" is decided.
1 CURSOR D D
Press the or
"Parameter Check" at "Auto Setup / Room EQ"
ENTER
menu, then press the
• The "Parameter Check" screen appears.
CURSOR D D
2
Press the or
ENTER
items, then press the
• The verification screen appears.
For instructions on checking the results of each item (
page 12, 13).
3
CURSOR D D H H
Press the or
Parameter Check", then press the
button.
• The "EQ Parameter Check" screen appears.
4
Press the
Equalizer curve, then press the
• The "EQ Check" screen appears.
H H
button to select
button.
The display is only an approximate picture of the response
and that correction is happening at all frequencies.
5
Press the
speaker channel.
6
If the check ends, pressing the
button to select "Exit", then press the
H H
button.
button to select the
• The "EQ Parameter Check" screen reappears.
button.
button to select "EQ
ENTER
7
Press the
"Exit", then press the
• The "Parameter Check" screen reappears.
CURSOR D D H H
or button to select the
ENTER
button.
CURSOR
F F or G G button to select the
CURSOR D D
or
ENTER
CURSOR D D H H
or button to select
ENTER
button.
79
ENGLISH
8 The results of "Auto Setup" procedure can be
reset even if the settings have been changed after
performing "Auto Setup" procedure:
CURSOR D D
Press the or
"Restore Yes 0 0 ", then press the
button.
9
CURSOR D D
Press the or
ENTER
"Exit", then press the
• The "Auto Setup / Room EQ" menu reappears.
H H
10
CURSOR D D
Press the
ENTER
"Exit", then press the
• The "System Setup Menu" reappears.
Advanced Setup – Part 2
H H
button to select
CURSOR F F
H H
button to select
button.
H H
or button to select
button.