Connecting Other Sources
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
Audio cable
A
Analog terminal (Stereo)
(White)
L
(Red)
R
Pin-plug cable
B
Analog terminal (Monaural, for subwoofer)
Pin-plug cable
C
Digital terminal (Coaxial)
(Orange)
Coaxial cable (75 Ω/ohm pin-plug cable)
D
Digital terminal (Optical)
Optical cable (Optical fiber cable)
E
DENON LINK terminal
DENON LINK cable
F
Speaker terminal
Speaker cable
G
Video terminal
L
(Yellow)
R
Video cable (75 Ω/ohms video pin-plug cable)
H
S-Video terminal
I
Component video terminal
(Green)
(Blue)
(Red)
Component video cable
Audio and Video cable
J
HDMI terminal
Audio signal
IN
Video signal
IN
Video cable
S-Video cable
(Y)
(P
/C
)
B
B
(P
/C
)
R
R
HDMI cable
Signal direction
OUT
OUT
IN
OUT
OUT
IN
14
ENGLISH
Connecting Other Sources
NOTE:
• Do not plug in the power supply cord until all connections
have been completed.
• When making connections, also refer to the operating
instructions of the other components.
• Be sure to connect the left and right channels properly (left
with left, right with right).
• Note that binding pin-plug cables together with power
supply cords or placing them near a power transformer will
result in hum or other noise.
NOTE:
• Connecting a LD (laser disc) player with a Dolby Digital
RF Output.
The AVR-3806 does not have a DD RF demodulator function.
Therefore, you need to use a commercially available
outboard DD RF demodulator and connect its digital output
to one of the AVR-3806 available digital inputs. Refer to the
demodulator's owner's manual for further information.
ENGLISH