Tp Search; Rt (Radio Text) - Denon AVR-3806 Operating Instructions Manual

Basic Operation
5
CHANNEL
Press the button.
• Automatically begin the PTY search operation.
If there is no station broadcasting the designated program
type with above operation, all the reception bands are
searched.
The station name is displayed on the display after searching
stops.
6
To continue searching, repeat step 4.
If no other station broadcasting the designated program
type is found when all the frequencies are searched, "NO
PROGRAMME" is displayed.

TP search

Use this function to find RDS stations broadcasting traffic
program (TP stations).
1
Set the input source to "TUNER".
2
TUNER
Press the button on the remote control
unit to select the TUNER mode.
3
SEARCH
Press the button until "TP SEARCH"
appears on the display.
The main unit's display switches as follows each time the
SEARCH button is pressed.
Display
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
4
CHANNEL
Press the button.
• Automatically begin the TP search operation.
If no TP station is found with above operation, all the
reception bands are searched.
The station name is displayed on the display after searching
stops.
5
To continue searching, repeat step 3.
If no other TP station is found when all the frequencies are
searched, "NO PROGRAMME" is displayed.
44
ENGLISH

RT (Radio Text)

"RT" appears on the display when radio text data is received.
1
Set the input source to "TUNER".
2
TUNER
Press the button on the remote control
unit to select the TUNER mode.
3 SEARCH
Press the button until "RT ON"
appears on the display.
The main unit's display switches as follows each time the
SEARCH button is pressed.
Display
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press the CURSOR F F or G G button.
If no text data is being broadcast, "NO TEXT DATA" is
displayed.
ENGLISH
Basic Operation