Listening To The Radio; Auto Tuning; Manual Tuning - Denon AVR-3806 Operating Instructions Manual

ENGLISH
Basic Operation

Listening to the radio

Check that the remote control unit is set to AMP or TUNER.
FUNCTION
TUNING PRESET
TUNER
MEMORY BLOCK
BAND
MODE
CHANNEL
SHIFT

Auto tuning

1 Set the input source to "TUNER".
(Main unit)
2
Press the
the remote control unit to
select the TUNER mode.
3
Watching the display, press the
select the desired band (AM or FM).
4
Press the
mode.
• "Auto" appears on the display.
TUNING
MEMORY
5
TUNING
Press the
• Automatic searching begins, then stops when a station is
tuned in.
ON SCREEN
• If tuning does not stop at the desired station, use to the
TUNER
"Manual tuning" operation.
NUMBER
(Remote control unit
in the AMP mode)
TUNER
button on
(Remote control unit)
BAND
button to
MODE
button to set the auto tuning
button.
41
ENGLISH

Manual tuning

1
Set the input source to "TUNER".
2
TUNER
Press the button on the remote control
unit to select the TUNER mode.
3
Watching the display, press the
select the desired band (AM or FM).
4
MODE
Press the button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns off.
5
TUNING
Press the button to tune in the desired
station.
The frequency changes continuously when the button is
held in.
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the "TUNED"
and "STEREO" indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
Basic Operation
BAND
button to