Resetting - Denon AVR-3806 Operating Instructions Manual

ENGLISH
Advanced Operation
MODE SELECTOR
SYSTEM CALL

Resetting

2 Resetting the single learned button
1 1
SET UP SETUP
Press and hold the Press and hole the
three seconds. three seconds.
• The IR segment blinks twice. • The IR segment blinks twice.
button (9→ → 7 7 → → 8 8 ) ) to select a
2 2
9, 7, 8 button (9 → → 7 7 → → 6 6 ) ) .
Press the
9, 7, 6
Press the
setting.
• The IR segment blinks twice.
• The IR segment blinks twice.
3
Press the MODE SELECTOR button.
4
Press the learned button you want to reset twice.
• The IR segment blinks twice.
Other key can be deleted by repeating steps 1 to 4.
2 Resetting all learned buttons
IR segment
1 1
Press and hole the Press and hold the
three seconds. three seconds.
• The IR segment blinks twice. • The IR segment blinks twice.
2 2
Press the
Press the
setting.
• The IR segment blinks twice.
• The IR segment blinks twice.
3
Press the MODE SELECTOR button you want to
reset twice.
• The IR segment blinks twice.
2 Resetting the system call buttons
1 1
Press and hold the Press and hole the
NUMBER
three seconds. three seconds.
• The IR segment blinks twice. • The IR segment blinks twice.
SETUP
2 2
Press the
Press the
setting.
• The IR segment blinks twice.
• The IR segment blinks twice.
3
Press the
to reset.
4
Press and hold the
button for at least button for at least
three seconds to clear the system call.
• The IR segment blinks twice.
SET UP SETUP
button for at least button for at least
button (9→ → 7 7 → → 8 8 ) ) to select a
9, 7, 8 button (9 → → 7 → → 6).
9, 7, 6
SET UP SETUP
button for at least button for at least
button (9→ → 7 7 → → 8 8 ) ) to select a
9, 7, 8 button (9 → → 7 → → 8).
9, 7, 8
SYSTEM CALL
button (1 to 3) you want
SETUP
button for at least
53
ENGLISH
2 Resetting the punch through setting
1 1
SET UP
Press and hole the MODE SELECTOR button for at least
Press the button (TV or SAT /
three seconds. CBL) you want to reset.
• The IR segment blinks twice.
2
SETUP
Press and hold the button for at least
three seconds.
• The IR segment blinks twice.
button (9 → → 8 → → 4) to select a
3
9, 8, 4
Press the
setting.
• The IR segment blinks twice.
4
SETUP
Press and hold the button for at least
three seconds to reset the punch through setting.
• The IR segment blinks twice.
2 All reset function
1 1
SET UP SETUP
Press and hole the Press and hold the button for at least button for at least
three seconds. three seconds.
• The IR segment blinks twice. • The IR segment blinks twice.
button (9→ → 7 7 → → 8 8 ) ) to select a
2
2 9, 7, 8 button (9 → → 8 → → 1).
Press the
9, 8, 1
Press the
setting.
• The IR segment blinks four times.
• Clear the entire system memory, which will restore the
• The IR segment blinks twice.
remote control unit to the factory default settings.
Only use this if you wish to clear all customized settings and
memories and restore the unit to its out-of-the-box factory
default settings.
Advanced Operation