System Configuration - Furuno FAR-3320W Installation Manual

SYSTEM CONFIGURATION

The radar(s) must be interconnected to the following type approved sensors:
EPFS meeting the requirements of the IMO resolution MSC.112(73).
Gyrocompass meeting the requirements of the IMO resolution A.424(XI).
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing
units having approved LAN ports.
FAR-3320W, FAR-3220W-BB
Basic configuration shown with solid line.
ANTENNA UNIT
w/ Perf. Monit. PM-32A
XN20CF-RSB-130
XN24CF-RSB-130
100-230 VAC
1ø, 50-60 Hz
440 VAC
1ø, 50-60 Hz
Sensor Adapter
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
Monitor Unit MU-231
Intelligent Hub HUB-3000
See page v for footnotes.
NOTICE
TRANSCEIVER UNIT
Waveguide
100-115/220-230 VAC
1ø, 50-60 Hz
(for de-icer)
POWER SUPPLY
Transformer
RU-1803
4 or Switching HUB
HUB-100
Select one
Select one
Select one
3 3
MU-270W
Digital In (ACK IN)
VDR
RTR-108
Antenna cable
PSU-014
UNIT
LAN Serial
100-115/220-230 VAC
1ø, 50-60 Hz
Serial 1, 2
Serial 3 - 7
EC-3000
PROCESSOR
UNIT
Digital Out 1 - 6
Sub monitor
IEC 61162-2
1
(Gyrocompass , AIS)
IEC 61162-1
2
(EPFS (Navigator),
SDME (Speed Log),
Echo Sounder, Wind,
5
Alarm , Navtex, etc.)
5
1: System Fail
2: Power Fail
3: Normal Close 1
4: Normal Close 2
5: Normal Open 1
6: Normal Open 2
iii