Direct-To Map Waypoint - Garmin GTN 625 Pilot's Manual

5.5
Foreword
A Direct-To course may be set to any waypoint selected on the Map page. The
Getting
waypoint is selected by touching an item such as an airport, VOR, or NDB or
Started
any other location. Touching the map page at any place not having an existing
Audio &
location name will create a waypoint with the name "MAPWPT." Touching the
Xpdr Ctrl
Direct-To key will automatically insert the selected waypoint as the Direct-To
Com/Nav
waypoint. The MAPWPT will be saved as a User Waypoint.
FPL
Direct-To
Proc
Touch To
Wpt Info
Remove The
Direct-To Course
Map
Traffic
Terrain
Figure 5-9 Touch the Map to Create a MAPWPT as the Direct-To Course Destination
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
5-6

Direct-To Map Waypoint

1. On the Map page, touch the map at the location intended to
be the Direct-To waypoint.
2. Press the Direct-To key on the right side of the unit.
Waypoint Tab
3. Touch the Activate key or press the small right knob to
activate the selection.
Garmin GTN 625/635/650 Pilot's Guide
Direct-To Waypoint Name
Direct-To Waypoint
Map Symbol
Touch To
Activate The
Direct-To Course
190-01004-03 Rev. K