Garmin GTN 625 Pilot's Manual page 369

Selecting NEXRAD in the FIS-B Weather Menu
1. While viewing the FIS-B weather page, touch the Menu key
to select the NEXRAD choice.
2. Touch the NEXRAD key to select Off, Regional, CONUS, or
Combined NEXRAD.
3. Touch the Back key to return to the FIS-B Weather Menu.
Animating FIS-B NEXRAD
NOTE: Animated NEXRAD functionality is available in software version
6.00 and later.
When Regional or CONUS NEXRAD is enabled for display and more than
two NEXRAD images have been received by the GTN, the NEXRAD display can
be animated on the FIS-B Weather page. As new NEXRAD images are received,
the GTN will automatically store them for future animation. The GTN can
animate up to six NEXRAD images from oldest to newest, showing each for one
second and the newest for two seconds.
NOTE: CONUS/Regional Combined NEXRAD cannot be animated. CONUS
and Regional NEXRAD can only be animated when displayed individually.
1. While viewing the FIS-B Weather page with NEXRAD enabled
for display, touch Menu and then press the Play NXRD key
to start the NEXRAD animation.
2. Touch Menu and then touch the Stop NXRD key to stop the
NEXRAD animation. The animation will also stop when leaving
the page or turning off NEXRAD on the FIS-B weather page.
190-01004-03 Rev. K
Figure 11-78 NEXRAD Source Selection
Garmin GTN 625/635/650 Pilot's Guide
Touch the Desired
NEXRAD Source
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
11-57