Direct-To A Search And Rescue Pattern - Garmin GTN 625 Pilot's Manual

8. Touch the EFC key to display the keypad. Use the keypad and
the Enter key to select the Expect Further Clearance time for
a reminder.
9. Touch the Load Hold key to accept the hold parameters and
return to the Direct-To page.
10. Touch the Hold Activate key or press the small right knob
to activate the selection.
5.9

Direct-To a Search and Rescue Pattern

This feature is available in software version 6.00 and later.
NOTE:
A search and rescue pattern can be created as part of a Direct-To to a flight
plan, off-route, or map waypoint. Creating a SAR pattern as part of an off-route
Direct-To will insert the SAR pattern waypoints at the end of the En Route
portion of the active flight plan.
1. Press the Direct-To key to display the Direct-To page.
Figure 5-14 Create SAR Pattern at Direct-To Waypoint
2. Touch the SAR key. The Direct-To Search and Rescue Patterns
page is displayed.
190-01004-03 Rev. K
Hold Pattern Course
Figure 5-13 Direct-To Page with Hold Selected
Direct-To Wpt
Garmin GTN 625/635/650 Pilot's Guide
Direct-To Wpt
Specified Course
To Direct-To Wpt
Touch To Activate Direct-
To Course and Hold
Touch To Selectic
Specific Course
Touch To Load Selected
SAR Pattern To Direct-To
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
5-9