Airport Directory - Garmin GTN 625 Pilot's Manual

Database Function
Name
Obstacle Obstacle information
for map, and TAWS
Basemap Boundary and road
information
15.1.3.1 Database Info
The Database Info page shows the Current databases, databases on Standby
on the SD card for future use, and database conflicts. Current databases show all
databases that are currently being used. Standby databases are loaded onto the
card, but are not being used. Database conflicts are shown and can be resolved
in the Conflicts tab.
15.1.3.2 Database Sync Operation
Database SYNC allows the GTN to synchronize databases from a single unit.
The pilot only needs to update a single database card and the new databases are
automatically SYNC'd through the units connected in the cockpit and configured
for Database Syncing.
Database SYNC is supported by these database types:
• Navigation
• Obstacle
• SafeTaxi

• Airport Directory

• Chartview (when support is added by Jeppesen)
190-01004-03 Rev. K
Where Update
Stored Cycle
Internal 56 days
memory
Internal As required
Memory
Table 15-1 Database List
Garmin GTN 625/635/650 Pilot's Guide
Provider Notes
fly.garmin.com Updates installed via
SD card and copied
into internal memory.
Databases that
include HOT lines
and power lines are
available for use
with GTN software
version 5.10, or
later. For helicopter
applications, Obstacle
databases that
include additional
low height obstacles
and power lines are
available.
fly.garmin.com Updates installed via
SD card and copied
into internal memory
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15-7