Approach Mode - Garmin GTN 625 Pilot's Manual

9.6.3.1
Foreword
Getting
Started
Audio &
Touch To Lower
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
9.6.3.2
Map
Traffic
Terrain
Touch To Manually
Set Field Elevation
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
NOTE: Activating the Use DEST APT feature automatically uses the
Appendix
elevation for the current destination airport for the TCAD. If no destination
airport is present in the GTN system, the TCAD will not receive a field
Index
elevation and therefore not automatically enter approach mode.
9-28
Traffic Audio
1. While viewing the TCAD Control menu, touch the Traffic
Audio key.
The Volume
Bar Graph Showing Volume Level
Figure 9-23 TCAD Traffic
2. Touch the arrow keys to raise or lower the TCAD Traffic Audio
level. The selected volume will be shown as a percentage value
and graphically with a bar graph.
3. Touch the Back key to return to the TCAD Control menu.
Field Elevation
1. While viewing the TCAD Control menu, touch the Field
Elevation key.
Figure 9-24 TCAD Traffic Field Elevation Selection
2. With the Use DEST APT key deactivated (no green bar), touch
the Field Elevation key to manually select the Field Elevation
for traffic reporting. Use the keypad to select the elevation
value.
3. Touch the Enter key to accept the selected value. The selected
value will be shown in the Field Elevation key.
4. Touch the Use DEST APT key to automatically use the field
elevation of the destination airport of the active flight plan for
traffic reporting.
Garmin GTN 625/635/650 Pilot's Guide
Touch To Raise
The Volume
Touch To Automatically
Select The Destination
Airport Field Elevation
190-01004-03 Rev. K